AIRCRAFT ENGINEERING AND CONSULTING SERVICES
CONTRACT DESIGN ENGINEERING
MANUFACTURING ASSISTANCE
DAR SERVICES

"Ensuring the airworthiness of your aircraft is our primary mission."

14 CFR §27 — AIRWORTHINESS STANDARDS:  NORMAL CATEGORY ROTORCRAFT

Sec. 27.1529   Instructions for Continued Airworthiness.

The applicant must prepare Instructions for Continued Airworthiness in accordance with Appendix A to this Part that are acceptable to the Administrator.  The instructions may be incomplete at type certification if a program exists to ensure their completion prior to delivery of the first rotorcraft or issuance of a standard certificate of airworthiness, whichever occurs later.

Amdt. 27-18, Eff. 10/14/80


Appendix A--Instructions for Continued Airworthiness

Sec. A27.1  General.

(a) This appendix specifies requirements for the preparation of Instructions for Continued Airworthiness as required by Sec. 27.1529.
(b) The Instructions for Continued Airworthiness for each rotorcraft must include the Instructions for Continued Airworthiness for each engine and rotor (hereinafter designated 'products'), for each appliance required by this chapter, and any required information relating to the interface of those appliances and products with the rotorcraft.  If Instructions for Continued Airworthiness are not supplied by the manufacturer of an appliance or product installed in the rotorcraft, the Instructions for Continued Airworthiness for the rotorcraft must include the information essential to the continued airworthiness of the rotorcraft.
(c) The applicant must submit to the FAA a program to show how changes to the Instructions for Continued Airworthiness made by the applicant or by the manufacturers of products and appliances installed in the rotorcraft will be distributed.

Amdt. 27-18, Eff. 10/14/80


Sec. A27.2  Format.

(a) The Instructions for Continued Airworthiness must be in the form of a manual or manuals as appropriate for the quantity of data to be provided.
(b) The format of the manual or manuals must provide for a practical arrangement.

Amdt. 27-18, Eff. 10/14/80


Sec. A27.3  Content.

The contents of the manual or manuals must be prepared in the English language.  The Instructions for Continued Airworthiness must contain the following manuals or sections, as appropriate, and information:

(a) Rotorcraft maintenance manual or section.
(1) Introduction information that includes an explanation of the rotorcraft's features and data to the extent necessary for maintenance or preventive maintenance.
(2) A description of the rotorcraft and its systems and installations including its engines, rotors, and appliances.
(3) Basic control and operation information describing how the rotorcraft components and systems are controlled and how they operate, including any special procedures and limitations that apply.
(4) Servicing information that covers details regarding servicing points, capacities of tanks, reservoirs, types of fluids to be used, pressures applicable to the various systems, location of access panels for inspection and servicing, locations of lubrication points, lubricants to be used, equipment required for servicing, tow instructions and limitations, mooring, jacking, and leveling information.
 (b) Maintenance Instructions.
(1) Scheduling information for each part of the rotorcraft and its engines, auxiliary power units, rotors, accessories, instruments, and equipment that provides the recommended periods at which they should be cleaned, inspected, adjusted, tested, and lubricated, and the degree of inspection, the applicable wear tolerances, and work recommended at these periods.  However, the applicant may refer to an accessory, instrument, or equipment manufacturer as the source of this information if the applicant shows that the item has an exceptionally high degree of complexity requiring specialized maintenance techniques, test equipment, or expertise.  The recommended overhaul periods and necessary cross reference to the Airworthiness Limitations section of the manual must also be included. In addition, the applicant must include an inspection program that includes the frequency and extent of the inspections necessary to provide for the continued airworthiness of the rotorcraft.
(2) Troubleshooting information describing probable malfunctions, how to recognize those malfunctions, and the remedial action for those malfunctions.
(3) Information describing the order and method of removing and replacing products and parts with any necessary precautions to be taken.
(4) Other general procedural instructions including procedures for system testing during ground running, symmetry checks, weighing and determining the center of gravity, lifting and shoring, and storage limitations.
 (c) Diagrams of structural access plates and information needed to gain access for inspections when access plates are not provided.
(d) Details for the application of special inspection techniques including radiographic and ultrasonic testing where such processes are specified.
(e) Information needed to apply protective treatments to the structure after inspection.
(f) All data relative to structural fasteners such as identification, discard recommendations, and torque values.
(g) A list of special tools needed.

Amdt. 27-18, Eff. 10/14/80


Sec. A27.4  Airworthiness Limitations section.

The Instructions for Continued Airworthiness must contain a section titled Airworthiness Limitations that is segregated and clearly distinguishable from the rest of the document.  This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure approved under Sec. 27.571.  If the Instructions for Continued Airworthiness consist of multiple documents, the section required by this paragraph must be included in the principal manual.  This section must contain a legible statement in a prominent location that reads:  "The Airworthiness Limitations section is FAA approved and specifies maintenance required under Secs. 43.16 and 91.403 of the Federal Aviation Regulations unless an alternative program has been FAA approved."

Amdt. 27-24, Eff. 8/18/90

149 AZALEA CIRCLE • LIMERICK, PA 19468-1330

610-495-6898 (Office) • 484-680-0507 (Cell)

E-mail S-Tech

© 2003 S-Tech Enterprises.   All Rights Reserved.
Web page created by S-Tech Enterprises.   Last revised: August 10, 2003