AIRCRAFT ENGINEERING AND CONSULTING SERVICES
CONTRACT DESIGN ENGINEERING
MANUFACTURING ASSISTANCE
DAR SERVICES

"Ensuring the airworthiness of your aircraft is our primary mission."

14 CFR §33 — AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES

Sec. 33.4   Instructions for Continued Airworthiness.

The applicant must prepare Instructions for Continued Airworthiness in accordance with Appendix A to this part that are acceptable to the Administrator.  The instructions may be incomplete at type certification if a program exists to ensure their completion prior to delivery of the first aircraft with the engine installed, or upon issuance of a standard certificate of airworthiness for the aircraft with the engine installed, whichever occurs later.

Amdt. 33-9, Eff. 10/14/80


Appendix A — Instructions for Continued Airworthiness

Sec. A33.1  General.

(a) This appendix specifies requirements for the preparation of Instructions for Continued Airworthiness as required by Sec. 33.4.
(b) The Instructions for Continued Airworthiness for each engine must include the Instructions for Continued Airworthiness for all engine parts.  If Instructions for Continued Airworthiness are not supplied by the engine part manufacturer for an engine part, the Instructions for Continued airworthiness for the engine must include the information essential to the continued airworthiness of the engine.
(c) The applicant must submit to the FAA a program to show how changes to the Instructions for Continued Airworthiness made by the applicant or by the manufacturers of engine parts will be distributed.

Amdt. 33-9, Eff. 10/14/80


Sec. A33.2  Format.

(a) The Instructions for Continued Airworthiness must be in the form of a manual or manuals as appropriate for the quantity of data to be provided.
(b) The format of the manual or manuals must provide for a practical arrangement.

Amdt. 33-9, Eff. 10/14/80


Sec. A33.3  Content.

The contents of the manual or manuals must be prepared in the English language.  The Instructions for Continued Airworthiness must contain the following manuals or sections, as appropriate, and information:

(a) Engine Maintenance Manual or Section.
(1) Introduction information that includes an explanation of the engine's features and data to the extent necessary for maintenance or preventive maintenance.
(2) A detailed description of the engine and its components, systems, and installations.
(3) Installation instructions, including proper procedures for uncrating, deinhibiting, acceptance checking, lifting, and attaching accessories, with any necessary checks.
(4) Basic control and operating information describing how the engine components, systems, and installations operate, and information describing the methods of starting, running, testing, and stopping the engine and its parts including any special procedures and limitations that apply.
(5) Servicing information that covers details regarding servicing points, capacities of tanks, reservoirs, types of fluids to be used, pressures applicable to the various systems, locations of lubrication points, lubricants to be used, and equipment required for servicing.
(6) Scheduling information for each part of the engine that provides the recommended periods at which it should be cleaned, inspected, adjusted, tested, and lubricated, and the degree of inspection the applicable wear tolerances, and work recommended at these periods.  However, the applicant may refer to an accessory, instrument, or equipment manufacturer as the source of this information if the applicant shows that the item has an exceptionally high degree of complexity requiring specialized maintenance techniques, test equipment, or expertise.  The recommended overhaul periods and necessary cross references to the Airworthiness Limitations section of the manual must also be included.  In addition, the applicant must include an inspection program that includes the frequency and extent of the inspections necessary to provide for the continued airworthiness of the engine.
(7) Troubleshooting information describing probable malfunctions, how to recognize those malfunctions, and the remedial action for those malfunctions.
(8) Information describing the order and method of removing the engine and its parts and replacing parts, with any necessary precautions to be taken.  Instructions for proper ground handling, crating, and shipping must also be included.
(9) A list of the tools and equipment necessary for maintenance and directions as to their method of use.
 (b) Engine Overhaul Manual or Section.
(1) Disassembly information including the order and method of disassembly for overhaul.
(2) Cleaning and inspection instructions that cover the materials and apparatus to be used and methods and precautions to be taken during overhaul.  Methods of overhaul inspection must also be included.
(3) Details of all fits and clearances relevant to overhaul.
(4) Details of repair methods for worn or otherwise substandard parts and components along with the information necessary to determine when replacement is necessary.
(5) The order and method of assembly at overhaul.
(6) Instructions for testing after overhaul.
(7) Instructions for storage preparation, including any storage limits.
(8) A list of tools needed for overhaul.

Amdt. 33-9, Eff. 10/14/80


Sec. A33.4  Airworthiness Limitations section.

The Instructions for Continued Airworthiness must contain a section titled Airworthiness Limitations that is segregated and clearly distinguishable from the rest of the document.  This section must set forth each mandatory replacement time, inspection interval, and related procedure required for type certification.  If the Instructions for Continued Airworthiness consist of multiple documents, the section required by this paragraph must be included in the principal manual.  This section must contain a legible statement in a prominent location that reads:  "The Airworthiness Limitations section is FAA approved and specifies maintenance required under Secs. 43.16 and 91.403 of the Federal Aviation Regulations unless an alternative program has been FAA approved."

Amdt. 33-13, Eff. 8/18/90

149 AZALEA CIRCLE • LIMERICK, PA 19468-1330

610-495-6898 (Office) • 484-680-0507 (Cell)

E-mail S-Tech

© 2003 S-Tech Enterprises.   All Rights Reserved.
Web page created by S-Tech Enterprises.   Last revised: August 10, 2003