AIRCRAFT ENGINEERING AND CONSULTING SERVICES
CONTRACT DESIGN ENGINEERING
MANUFACTURING ASSISTANCE
DAR SERVICES

"Ensuring the airworthiness of your aircraft is our primary mission."

Part 45 — IDENTIFICATION AND REGISTRATION


SUBPART B — IDENTIFICATION OF AIRCRAFT AND RELATED PPODUCTS  

Sec. 45.15   Replacement and modification parts.

(a) Except as provided in paragraph (b) of this section, each person who produces a replacement or modification part under a Parts Manufacturer Approval issued under Sec. 21.303 of this chapter shall permanently and legibly mark the part with —
(1) The letters "FAA-PMA";
(2) The name, trademark, or symbol of the holder of the Parts Manufacturer Approval;
(3) The part number; and
(4) The name and model designation of each type certificated product on which the part is eligible for installation.
(b) If the Administrator finds that a part is too small or that it is otherwise impractical to mark a part with any of the information required by paragraph (a) of this section, a tag attached to the part or its container must include the information that could not be marked on the part.   If the marking required by paragraph (a)(4) of this section is so extensive that to mark it on a tag is impractical, the tag attached to the part or the container may refer to a specific readily available manual or catalog for part eligibility information.


Amdt. 45-14, Eff. 4/28/82

149 AZALEA CIRCLE • LIMERICK, PA 19468-1330

610-495-6898 (Office) • 484-680-0507 (Cell)

E-mail S-Tech

© 2003 S-Tech Enterprises.   All Rights Reserved.
Web page created by S-Tech Enterprises.   Last revised: August 10, 2003